DL4500-EDH+ Ethernet TCP/IP to Allen Bradley’s DH+

ethernet/ip

Price $1,695 USD
Lightweight, Din Rail Mounted, DC powered network interface bridge. Uses Lantronix’s industry proven 10-Base T Ethernet TCP/IP module to access Allen Bradley DH+ networks. Data highway plus auto baud detection and other features make Telneting over Ethernet to the Lantronix Module the only configuration needed for the TCP/IP version. The DL4500-EDH+ encapsulates DF1 packets over Ethernet. The DL4500-EDH+ does not support Allen-Bradley Ethernet (CSP) or Ethernet/IP protocols. Ethernet based processors like the Allen Bradley ControlLogix can not access the DH+ network using the DL4500.

The DL4500-EDH+ available in two different models: the DL4500-EDH+ DF1-MultiMaster and the DL4500-EDH+ Standard Tunnel. The DL4500-EDH+ DF1-MultiMaster allows up to 4 computers to connect simultaneously to the ethernet side of the DL4500. This model has slower data exchange speeds because of its ability to connect to multiple computers. If speed is an issue, consider the DL4500-EDH+ Standard Tunnel model. The DL4500-EDH+ Standard Tunnel allows only 1 computer to connect to the ethernet side of the DL4500 but exchanges data at faster speeds.

Documentation

  • DL4500-EDH+allows DF1 serial drivers to communicate over Allen Bradleys DH+ network via TCP/IP protocol.
  • DL4500-EDH-485 allows DF1 serial drivers to communicate over Allen Bradleys DH-485 network via TCP/IP protocol.

Application Diagrams